Tomas M., Kamiloglu S., Nemli E., Ozdal T., Haque S., Apak R., Capanoglu E., “From carotene-rich waste-to-food: Extraction, food applications, challenges and opportunities,” (2025) Trends in Food Science and Technology, 155, no. 104756.
2024 Yayınları
Zhao L., Jasim D.J., Alizadeh A., Shirani N., Nasajpour-Esfahani N., Salahshour S., Shamsborhan M., “Offering a channel for cooling three lithium-ion battery packs with water/Cu nanofluid: An exergoeconomic analysis,” (2024) Ain Shams Engineering Journal, 15 (7), no. 102788.
Bigham A., Islami N., Khosravi A., Zarepour A., Iravani S., Zarrabi A., “MOFs and MOF-Based Composites as Next-Generation Materials for Wound Healing and Dressings,” (2024) Small, 20 (30), no. 2311903.
Düztaş K., “Hawking radiation at the zero temperature limit,” (2024) European Physical Journal C, 84 (11), no. 1164.
Düztaş K., “Can the induced increase in the angular velocity prevent the overspinning of BTZ black holes?,” (2024) European Physical Journal C, 84 (7), no. 669.
Alkhalidi H.O.D., Bilgen S., “Drowsiness Detection Using Brain Signal Recognition Deep Neural Network (BSRDNN),” (2024) International Journal of Safety and Security Engineering, 14 (3), pp. 753–764.
Barut Z., Akdeniz F.T., Avsar O., Cabbar A.T., “Investigation of miRNA-199a-5p Expression and its Clinical Association With LDL Cholesterol Levels in Atherosclerosis,” (2024) In Vivo, 38 (6), pp. 2656 – 2664.
Sabir Z., Rada T.B., Kassem Z., Umar M., Salahshour S., “A novel radial basis neural network for the Zika virus spreading model,” (2024) Computational Biology and Chemistry, 112, no. 108162.
Karabıyık Acar O., Bozdağ G., Hacıhasanoğlu E., Tuncer A.A., Aysan E., Torun Köse G., “Optimizing decellularization protocols for human thyroid tissues: a step towards tissue engineering and transplantation,”(2024) Biomedical Materials (Bristol), 19 (4), no. 045034.
Pamuk M.T., “Analytical Modeling of Counter-Current Drying Process,” (2024) International Journal of Thermodynamics, 27 (2), pp. 27 – 36.
Ghahremaninejad R., Bilgen S., “A Novel Resource-Aware Distributed Cooperative Decision-Making Mechanism for Connected Automated Vehicles,” (2024) SAE International Journal of Connected and Automated Vehicles, 7 (4).
Karabiyik Acar O., Nozhatzadeh G.D., Tuncer A.A., Torun Köse G., Aysan E., “Effect of different sodium alginate compositions on 3D microcapsule structure and cell viability,” (2024) Journal of Mechanics in Medicine and Biology, 24 (1), no. 2350048.
Zarepour A., Gok B., Budama-Kilinc Y., Khosravi A., Iravani S., Zarrabi A., “Bacterial nanocellulosesas sustainable biomaterials for advanced wound healing and dressings,” (2024) Journal of Materials Chemistry B.
Türk O., Demi̇Rel N., Yaltirik C.K., Kaya M., Şahin Ö.F., Yilmaz S.G., Akdeniz F.T., Isbir T., “Unraveling the Impact of miRNA-17 in Glial Tumors and Cerebral Metastases: A Step Towards Enhanced Diagnosis and Prognosis,” (2024) In Vivo, 38 (2), pp. 652 – 656.
Bigham A., Zarepour A., Khosravi A., Iravani S., Zarrabi A., “3D and 4D printing of MXene-based composites: from fundamentals to emerging applications,” (2024) Materials Horizons.
Barut Z., Akdeniz F.T., Isbir T., Investigation of Mirna-223-3p Expression in Non-small Cell Lung Cancers,” (2024) Anticancer Research, 44 (2), pp. 585 – 591.
Strippoli R., Niayesh-Mehr R., Adelipour M., Khosravi A., Cordani M., Zarrabi A., “Allameh A.Contribution of Autophagy to Epithelial Mesenchymal Transition Induction during Cancer Progression,” (2024) Cancers, 16 (4), no. 807.
Zardari S., Kutlu İ., Nayeb A., “Investigation of structural performances of historical building elements made with local materials using the finite element method,” (2024) Challenge Journal of Concrete Research Letters, 15 (3), pp. 101 – 111.
Zarepour A., Khosravi A., Iravani S., Zarrabi A., “Biohybrid Micro/Nanorobots: Pioneering the Next Generation of Medical Technology,” (2024) Advanced Healthcare Materials.
Simsek R.O., Calik R., Yavuz F.S., Kivanc O.C., “Analysis and Implementation of Sensorless PMSM Drive with Reduced DC-Link Capacitance Under Parameter Variations,” (2024) 10th 2024 International Conference on Control, Decision and Information Technologies, CoDIT 2024, pp. 1023 – 1027.
Ahmadian A., Salahshour S., Balas V.E., Baleanu D., “Uncertainty in Computational Intelligence-Based Decision Making: A volume in Advanced Studies in Complex Systems,” (2024) Uncertainty in Computational Intelligence-Based Decision Making: A volume in Advanced Studies in Complex Systems, pp. 1 – 322.
Yavuz M., Kivanc O.C., “Optimization of a Cluster-Based Energy Management System Using Deep Reinforcement Learning Without Affecting Prosumer Comfort: V2X Technologies and Peer-to-Peer Energy Trading,” (2024) IEEE Access, 12, pp. 31551 – 31575.
Zarepour A., Khosravi A., Yücel Ayten N., Çakır Hatır P., Iravani S., Zarrabi A., “Innovative approaches for cancer treatment: graphene quantum dots for photodynamic and photothermal therapies,” (2024) Journal of Materials Chemistry B, 12 (18), pp. 4307 – 4334.
Esfe M.H., Ali Eftekhari S., Mohammad Sajadi S., Hashemian M., Salahshour S., Motallebi S.M., “Determining the best structure for an artificial neural network to model the dynamic viscosity of MWCNT-ZnO (25:75)/SAE 10W40 oil nano-lubricant,” (2024) Materials Today Communications, 38, no. 107607.
Günay G., Dündar S., “Understanding walking behaviour during COVID-19: Binary Logit and ANN approach,” (2024) Proceedings of the Institution of Civil Engineers: Municipal Engineer.
Saeed B.M., Hakan Yilmaz C., Kivanc O.C., Nejat Tuncay R., “Development of a Hybrid Energy Storage System for a Forklift Vehicle,” (2024) Proceedings - 2024 IEEE 6th Global Power, Energy and Communication Conference, GPECOM 2024, pp. 120 – 125.
Alaraji Y., Alp S., “An investigation into vibration analysis for detecting faults in vehicle steering outer tie-rod,” (2024) Acta IMEKO, 13 (1).
Rangarajan K., Singh P., Salahshour S., Mondal S.P., “Analysis of Second-Order Linear Fuzzy Differential Equation Under an Innovative Fuzzy Derivative Approach and Its Application,” (2024) Journal of Uncertain Systems, no. 2450022.
Kholmetskii A.L., Missevitch O.V., Yarman T., “Role of electromagnetic energy and momentum in the Aharonov–Bohm effect,” (2024) Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 480 (2283), no. 20230286.
Dai X., Yücel Yardimci M., Aydin S., De Schutter G.Reaction Kinetics and Fresh State Properties of Alkali-Activated Slag Mixtures with Secondary Precursors,” (2024) Journal of Materials in Civil Engineering, 36 (2), no. 04023566.
Acar O.K., Tuncer A.A., Şahin F., Köse G.T., Aysan E., “Alginate-based cell encapsulation using different crosslinker elements,” (2024) Journal of Mechanics in Medicine and Biology, no. 2450031.
Rahaman M., Das M., Alam S., Salahshour S., Mondal S.P., “Metric Space and Calculus of Type-2 Interval-Valued Functions,” (2024) Journal of Uncertain Systems, no. 2450018.
Admon M.R., Senu N., Ahmadian A., Majid Z.A., Salahshour S., ”A new modern scheme for solving fractal–fractional differential equations based on deep feedforward neural network with multiple hidden layer,” (2024) Mathematics and Computers in Simulation, 218, pp. 311 – 333.
Sezen S., Bilici Ç., Zarepour A., Khosravi A., Zarrabi A., Mostafavi E., “Mechanical Properties of Multifunctional Hydrogels,” (2024) Multifunctional Hydrogels: From Basic Concepts to Advanced Applications, pp. 214 – 233.
Kamiloglu S., Günal-Köroğlu D., Ozdal T., Tomas M., Capanoglu E., “Recent advances on anti-diabetic potential of pigmented phytochemicals in foods and medicinal plants,” (2024) Phytochemistry Reviews.
Kubat Öktem E., Yazar M., Aysan E., Karabıyık Acar Ö., “Computational drug repurposing for primary hyperparathyroidism,” (2024) Molecular and Cellular Endocrinology, 583, no. 112159.
Özok A.F., “Mathematical Modelling and Fuzzy Logic,” (2024) Lecture Notes in Networks and Systems, 1088 LNNS, pp. 3 – 6.
An Q., Basem A., Alizadeh A., Al-Rubaye A.H., Jasim D.J., Tang M., Salahshour S., Sabetvand R., “ The effect of initial temperature and oxygen ratio on air-methane catalytic combustion in a helical microchannel using molecular dynamics approach,” (2024) Case Studies in Thermal Engineering, 54, no. 104062.
Guo X., Jasim D.J., Alizadeh A., Keivani B., Nasajpour-Esfahani N., Salahshour S., Shamsborhan M., Sabetvand R., “Investigating the effect of the number of layers of the atomic channel wall on Brownian displacement, thermophoresis, and thermal behavior of graphene/water nanofluid by molecular dynamics simulation,” (2024) Case Studies in Thermal Engineering, 53, no. 103859.
Sabir Z., Umar M., Salahshour S., Nicolas R., “A Gudermannian neural network performance for the numerical environmental and economic model,” (2024) Alexandria Engineering Journal, 87, pp. 478 – 488.
Vats S., Sharma V., Singh K., Katti A., Mohd Ariffin M., Nazir Ahmad M., Ahmadian A., Salahshour S., “Incremental learning-based cascaded model for detection and localization of tuberculosis from chest x-ray images,” (2024) Expert Systems with Applications, 238, no. 122129.
Gao J., Jasim D.J., Sajadi S.M., Eftekhari S.A., Hekmatifar M., Salahshour S., Shahdost F.T., Toghraie D., “An RBF-based artificial neural network for prediction of dynamic viscosity of MgO/SAE 5W30 oil hybrid nano-lubricant to obtain the best performance of energy systems,” (2024) Materials Today Communications, 38, no. 107836.
Yilmaz A., Koc S., Babaei E., “A Coupled-Inductor Based 17-Level Multilevel Inverter,” (2024) 4th International Conference on Smart Grid and Renewable Energy, SGRE 2024 – Proceedings.
Mohammed M.J., Nejat Tuncay R., “Exploring The Viability of Variable Speed mSyr Motor for Air-Conditioning Applications,” (2024) Proceedings - 2024 IEEE 6th Global Power, Energy and Communication Conference, GPECOM 2024, pp. 245 – 249.
Abderrahmane A., Khetib Y., Ghodratallah P., Jasim D.J., Rawa M., Qasem N.A.A., Younis O., Akbari O.A., Salahshour S., “Thermal performance of 3D Darcy-forchheimer porous rectangular wavy enclosures containing a water-Fe3O4 ferro-nanofluid under magnetic fields,” (2024) Case Studies in Thermal Engineering, 53, no. 103790.
Sun C., Fares M.N., Sajadi S.M., Li Z., Jasim D.J., Hammoodi K.A., Nasajpour-Esfahani N., Salahshour S., Alizadeh A., “Numerical examination of exergy performance of a hybrid solar system equipped with a sheet-and-sinusoidal tube collector: Developing a predictive function using artificial neural network,” (2024) Case Studies in Thermal Engineering, 53, no. 103828.
Xiao L., Basem A., Zhang Y., Jasim D.J., Salahshour S., Li Z., Toghraie D., “A numerical study of the effect of variable heat flux on the stability and thermal behavior of SARS-COV-2 structure: A molecular dynamics approach,” (2024) Case Studies in Thermal Engineering, 56, no. 104213.
Kalita J., Das R., Hosseini K., Salahshour S., Baleanu D., “Some Models in Unmagnetized Plasma Involving Kaniadakis Distributed Electrons and Temperature Ratio: Dust Ion Acoustic Solitary Waves,” (2024) Journal of Applied and Computational Mechanics, 10 (4), pp. 792 – 800.
2023 Yayınları
Dai X., Ren Q., Aydin S., Yardimci M.Y., De Schutter G., “Accelerating the reaction process of sodium carbonate-activated slag mixtures with the incorporation of a small addition of sodium hydroxide/sodium silicate,” (2023) Cement and Concrete Composites, 141, no. 105118.
Karamuk M., Alankus O.B., “Direct Tilt Controller Design with Disturbance Compensation and Implementation for a Narrow Tilting Electric Vehicle,” (2023) Energies, 16 (15), no. 5724.
Düztaş K., “Challenging event horizons with spin (3/2) fields,” (2023) European Physical Journal C, 83 (7), no. 567.
Dai X., Aydin S., Yucel Yardimci M., De Schutter G., “Fresh and hardened state properties, reaction kinetics and microstructure of sodium sulfate/sodium hydroxide – Activated slag mixtures,” (2023) Construction and Building Materials, 401, no. 132943.
Karabıyık Acar Ö., Başoğlu H., Keğin M., Nozhatzadeh G.D., Hacıhasanoğlu E., Tuncer A.A., Şahin F., Torun Köse G., Aysan E., “Microencapsulation of parathyroid cells via electric field and non-surgical transplantation approach,” (2023) Journal of Endocrinological Investigation, 46 (11), pp. 2257 – 2267.
Mukherjee A.K., Gazi K.H., Salahshour S., Ghosh A., Mondal S.P., “A Brief Analysis and Interpretation on Arithmetic Operations of Fuzzy Numbers,” (2023) Results in Control and Optimization, 13, no. 100312.
Kubat Oktem E., Demir U., Yazar M., Arga K.Y., “Three candidate anticancer drugs were repositioned by integrative analysis of the transcriptomes of species with different regenerative abilities after injury,” (2023) Computational Biology and Chemistry, 106, no. 107934.
Ramadan M.N.A., Hilles S.M.S., Alkhedher M., “Design and Study of an AI-Supported Autonomous Stair Climbing Robot,” (2023) El-Cezeri Journal of Science and Engineering, 10 (3), pp. 571 – 585.
Derakhshan M.H., Kumar P., Salahshour S., “A high-order space-time spectral method for the distributed-order time-fractional telegraph equation,” (2023) International Journal of Dynamics and Control, 12 (8), pp. 2778 – 2794.
Eryarsoy E., Nalcioglu H., Kilic H.S., Yalcin A.S., Zaim S., Delen D., “A Framework for Mitigating Excessive Transportation in the Context of Manufacturing Localization,” (2023) IEEE Transactions on Fuzzy Systems, 31 (2), pp. 619 – 630.
Dai X., Aydin S., Yardimci M.Y., Sun Y., De Schutter G., “Effect of temperature on the fresh and hardened state properties of alkali-activated slag/fly ash mixtures,” (2023) Materials and Structures/Materiaux et Constructions, 56 (5), no. 107.
Abdulazeez Al-Rawe T.S., Elwi T.A., Tureli D.K., “A Dual-Band High Efficiency Fractal Rectenna for RF Energy Harvesting Systems,” (2023) HORA 2023 - 2023 5th International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings.
Raheem A.A.R., Tureli D.K., “Distributed Optimization Algorithm for Resource Allocation in MIMO Network with Intelligent,” (2023) HORA 2023 - 2023 5th International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings.
Ramadan M.N.A., Alkhedher M., Tevfik Akgun B., Alp S., “Portable AI-powered spice recognition system using an eNose based on metal oxide gas sensors,” (2023) 2023 International Conference on Smart Applications, Communications and Networking, SmartNets 2023.
Dimokas N., Margaritis D., Faye S., Camino R., Alankuş O., Ozatay E., “A Mobile Computing Based Tool for Low-Emission Driving,” (2023) Lecture Notes in Intelligent Transportation and Infrastructure, Part F1378, pp. 238 – 250.
Alcan P., “The Importance of the Internet of Things in Neurological Disorder: A Literature Review,” (2023) Diagnosis of Neurological Disorders Based on Deep Learning Techniques, pp. 205 – 219.
Hizarci S., Tanyel S., Dündar S., Gökaşar I., Şengöz B., Topal A., “A New Approach for Acceptance of Critical Gap at Unsignalized Intersections,” (2023) Turkish Journal of Civil Engineering, 34 (4), pp. 105 – 132.
Al-Bayati A.K.M., Alturk E., Al-Araji A.S., “Development of a Fuel Cell Energy Controller Design for an Electric Vehicle Engine via a PID-PSO Robust Control Algorithm,” (2023) 2023 IEEE Conference on Energy Conversion, CENCON 2023, pp. 126 – 131.
Beglarigale A., Yiǧiter H., Yazici H., “Corrosion Performance of Various Reinforced Concretes Subjected to a Systematic Wetting-Drying Cycle Regime in Real Marine Environment,” (2023) Journal of Materials in Civil Engineering, 35 (5), no. 04023056.
Yousaf H., Kivanc O.C., “PSO Optimized Nonlinear Control of DC Microgrid with Intelligent Energy Management System,” (2023) 2nd International Engineering Conference on Electrical, Energy, and Artificial Intelligence, EICEEAI 2023.
Hussein A.T., Kivanc D., Abdullah H., Falih M.S., “Deep Learning Based Spectrum Sensing Method for Cognitive Radio System,” (2023) Lecture Notes in Networks and Systems, 643 LNNS, pp. 319 – 331.
Kheder H.A., Al-Asadi H.A.A., Türeli D.K., “Routing Protocol Performance in Vehicular Ad Hoc Networks: An Evaluation,” (2023) Proceedings - International Conference on Developments in eSystems Engineering, DeSE, pp. 397 – 401.
Gatea A.N., Abed Al-Asadi H.A., Tureli D.K., “Evaluating Energy-Saving Routing Techniques for MANET Protocols,” (2023) Proceedings - 2023 15th IEEE International Conference on Computational Intelligence and Communication Networks, CICN 2023, pp. 23 – 28.
Aksu O., Karlikanovaite-Balikci A., “Earthquakes in Kahramanmaras; Assessment of Affected Areas and Recommendations for Settlement Regeneration,” (2023) Eurasia Proceedings of Science, Technology, Engineering and Mathematics, 26, pp. 404 – 415.
Sadeghi Movahhed A., Shirkhani A., Zardari S., Mashayekhi M., Noroozinejad Farsangi E., Majdi A., “Modified endurance time method for seismic performance assessment of base-isolated structures,” (2023) Journal of Building Engineering, 67, no. 105955.
Özkan-Karabacak A., Acoǧlu-Çelik B., Özdal T., Yolci-Ömeroǧlu P., Çopur Ö.U., Baştuǧ-Koç A., Pandiselvam R., “Microwave-Assisted Hot Air Drying of Orange Snacks: Drying Kinetics, Thin Layer Modeling, Quality Attributes, and Phenolic Profiles,” (2023) Journal of Food Biochemistry, 2023, no. 6531838.
Kamoona M., Kivanc O.C., Ahmed O.A., “Intelligent Energy Management System for Hybrid Electric Vehicle Based on Optimization Wavelet Neural Network by PSO Algorithm,” (2023) Lecture Notes in Networks and Systems, 624 LNNS, pp. 558 – 573.
Kamoona M.A., Kivanc O.C., Ahmed O.A., “Intelligent Energy Management System Evaluation of Hybrid Electric Vehicle Based on Recurrent Wavelet Neural Network and PSO Algorithm,” (2023) International Journal of Intelligent Engineering and Systems, 16 (1), pp. 388 – 401.
Sadeghi Movahhed A., Shirkhani A., Zardari S., Noroozinejad Farsangi E., Karimi Pour A., “Effective range of base isolation design parameters to improve structural performance under far and near-fault earthquakes,” (2023) Advances in Structural Engineering, 26 (1), pp. 52 – 71.
Özok A.F., “Mathematics, Scientific Reasoning and Fuzzy Logic,” (2023) Lecture Notes in Networks and Systems, 758 LNNS, pp. 35 – 38.
2022 Yayınları
Kivanç Ö.C., Akgün B.T., Bilgen S., Ozturk S.B., Baysan S., Tuncay R.N., “Residential energy management system based on integration of fuzzy logic and simulated annealing,” (2022) Turkish Journal of Electrical Engineering and Computer Sciences, 30 (4), pp. 1539 – 1554.
Dündar S., “Investigating the Service Quality of Kocaeli Tram Service Using Artificial Neural Networks,” (2022) Teknik Dergi/Technical Journal of Turkish Chamber of Civil Engineers, 33 (5), pp. 12429 – 12456.
Dai X., Aydin S., Yardimci M.Y., De Schutter G., “Early structural build-up, setting behavior, reaction kinetics and microstructure of sodium silicate-activated slag mixtures with different retarder chemicals,” (2022) Cement and Concrete Research, 159, no. 106872.
Kilic H.S., Kalender Z.T., Yalcin A.S., Erkal G., Tuzkaya G., “Information system selection for hospitality industry via integrated use of IVIF-DEMATEL and IVIF-TOPSIS,” (2022) Journal of Intelligent and Fuzzy Systems, 42 (1), pp. 317 – 335.
Dundar S., Berktas E.S., Hoke M.C., “Modelling the Effects of E-Scooters in Urban Traffic Using Artificial Neural Networks,” (2022) Proceedings - 2022 Innovations in Intelligent Systems and Applications Conference, ASYU 2022.
Kinvan E., Ozdal T., “IMPROVED DOMESTIC PROBIOTIC ENERGY BAR DESIGN BY USING SENSORY ANALYSIS METHODS,” (2022) Latin American Applied Research, 52 (4), pp. 387 – 392.
Kivanç Ö.C., Özgönenel O., Bostan Ö., Güzel Ş., Demirsoy M., “A novel crimping technique approach for high power white good plugs,” (2022) Turkish Journal of Electrical Engineering and Computer Sciences, 30 (4), pp. 1525 – 1538.
Ramadan M.N.A., Hilles S.M.S., Alkhedher M., Ghazal M., “Real-time Automated License Plate Recognition and Tracking of Runaway Vehicles,” (2022) 3rd International Informatics and Software Engineering Conference, IISEC 2022.
Özok A.F., “Fuzzy Set Theory and the Social Sciences,” (2022) Lecture Notes in Networks and Systems, 307, pp. 182 – 184.
Ghahremaninejad R., Bilgen S., “Introducing a Novel ROS-based Cooperative Autonomous Vehicles Planning Simulation Framework, CAVPsim,” (2022) International Conference on Vehicle Technology and Intelligent Transport Systems, VEHITS - Proceedings, pp. 208 – 215.
Gozukirmizi A.S., Kivanc O.C., “Detection of surface anomalites on electric motors based on visual deep learning methods,” (2022) IEEE Global Energy Conference, GEC 2022, pp. 208 – 216.
Karamuk M., Alankus O.B., “Development and Experimental Implementation of Active Tilt Control System Using a Servo Motor Actuator for Narrow Tilting Electric Vehicle,” (2022) Energies, 15 (6), no. 1996.
Dai X., Aydın S., Yardımcı M.Y., Lesage K., De Schutter G., “Rheology and microstructure of alkali-activated slag cements produced with silica fume activator,” (2022) Cement and Concrete Composites, 125, no. 104303.
Yildirim S.T., Keskin F.S., Baynal K., Shahmaleki P., “Investigation on properties of cement mortar with bottom ash and perlite,” (2022) Structural Concrete, 23 (6), pp. 3945 – 3959.
Yazar M., Ozbek P., “Assessment of 13 in silico pathogenicity methods on cancer-related variants,” (2022) Computers in Biology and Medicine, 145, no. 105434.
Tutkun B., Beglarigale A., Yazici H., “Alkali-silica reaction of sanitary ware ceramic wastes utilized as aggregate in ordinary and high-performance mortars,” (2022) Construction and Building Materials, 319, no. 126076.
Yalcin E., Gok I., Ozdal T., “Effect of grape seed flour on the phenolic profile, antioxidant capacity and sensory properties of muffins,” (2022) Latin American Applied Research, 52 (3), pp. 213 – 220.
Mert S., Sancak S., Aydın H., Fersahoğlu A.T., Somay A., Özkan F., Çulha M., “Development of a SERS based cancer diagnosis approach employing cryosectioned thyroid tissue samples on PDMS,” (2022) Nanomedicine: Nanotechnology, Biology, and Medicine, 44, no. 102577.
Kamiloglu S., Ozdal T., Tomas M., Capanoglu E., “Oil matrix modulates the bioaccessibility of polyphenols: a study of salad dressing formulation with industrial broccoli by-products and lemon juice,” (2022) Journal of the Science of Food and Agriculture, 102 (12), pp. 5368 – 5377.
Zayat W., Kilic H.S., Yalcin A.S., Zaim S., Delen D., “Application of MADM methods in Industry 4.0: A literature review,” (2023) Computers and Industrial Engineering, 177, no. 109075.
Kholmetskii A.L., Yarman T., Missevitch O., “Klein-Gordon equation for electrically charged particles with new energy-momentum operator,” (2022) Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 478 (2267), no. 20220214.
Azzaghdam E.T., Alankus O.B., “Longitudinal Control of Autonomous Vehicles Consisting Power-Train With Non-Linear Characteristics,” (2022) IEEE Transactions on Intelligent Vehicles, 7 (1), pp. 133 – 142.
Gültekin Subaşı B., Ozdal T., Capanoglu E., “Propolis and gastrointestinal tract diseases,” (2022) Bee Products and Their Applications in the Food and Pharmaceutical Industries, pp. 139 – 158.
Kırelli Y., Arslankaya S., Alcan P., “MRI Image Analysis with Deep Learning Methods in Brain Tumor Diagnosis,” (2022) Lecture Notes in Mechanical Engineering, pp. 35 – 42.
Movahhed A.S., Zardari S., Şadoğlu E., “Seismic performance of a building base-isolated by TFP susceptible to pound with a surrounding moat wall,” (2022) Earthquake and Structures, 23 (1), pp. 87 – 100.
Dai X., Aydin S., Yardimci M.Y., De Schutter G., “Rheology and structural build-up of sodium silicate- and sodium hydroxide-activated GGBFS mixtures,” (2022) Cement and Concrete Composites, 131, no. 104570.
Tureli D.K., Qassab Z., “Comparing performance of ofdm based v2v system in rayleigh and weibull fading channels,” (2022) Eurasia Proceedings of Science, Technology, Engineering and Mathematics, 21, pp. 131 – 138.
Oktem E.K., Yazar M., “Drug Repositioning Identifies Six Drug Candidates for Systemic Autoimmune Diseases by Integrative Analyses of Transcriptomes from Scleroderma, Systemic Lupus Erythematosus, and Sjogren's Syndrome,” (2022) OMICS A Journal of Integrative Biology, 26 (12), pp. 683 – 693.
Dai X., Aydin S., Yardimci M.Y., Lesage K., De Schutter G., “Early age reaction, rheological properties and pore solution chemistry of NaOH-activated slag mixtures,” (2022) Cement and Concrete Composites, 133, no. 104715.
Özok A.F., “Ergonomics, Human Performance, and Fuzzy Logic,” (2022) Lecture Notes in Networks and Systems, 504 LNNS, pp. 16 – 18.
Gözü M., Ozkan B., Emirler M.T., “Disturbance Observer Based Active Independent Front Steering Control for Improving Vehicle Yaw Stability and Tire Utilization,” (2022) International Journal of Automotive Technology, 23 (3), pp. 841 – 854.
Kivanc O.C., Ozturk S.B., Toliyat H.A., “On-line dead time compensator for PMSM drive based on current observer,” (2022) Engineering Science and Technology, an International Journal, 25, no. 100987.
Emheisen M.A., Emirler M.T., Ozkan B., “Lateral Stability Control of Articulated Heavy Vehicles Based on Active Steering System,” (2022) International Journal of Mechanical Engineering and Robotics Research, 11 (8), pp. 575 – 582.
Calik R., Simsek R.O., Kivanc O.C., “A Simple Recursive Least Squares Approach for Off-line Parameter Identification of FOC Permanent Magnet Synchronous Machine Drive,” (2022) IEEE Global Energy Conference, GEC 2022, pp. 340 – 344.
2021 ve Öncesi Yayınlar
Beglarigale A., Eyice D., Seki Y., Yalçınkaya Ç., Çopuroğlu O., Yazıcı H., “Sodium silicate/polyurethane microcapsules synthesized for enhancing self-healing ability of cementitious materials: Optimization of stirring speeds and evaluation of self-healing efficiency,” (2021) Journal of Building Engineering, 39, no. 102279.
Dai X., Aydin S., Yücel Yardimci M., Qiang R.E.N., Lesage K., De Schutter G., “Rheology, early-age hydration and microstructure of alkali-activated GGBFS-Fly ash-limestone mixtures,” (2021) Cement and Concrete Composites, 124, no. 104244.
Kamiloglu S., Tomas M., Ozdal T., Capanoglu E., “Effect of food matrix on the content and bioavailability of flavonoids,” (2021) Trends in Food Science and Technology, 117, pp. 15 – 33.
Kivanc O.C., Ustun O., “Investigation of regenerative braking performance of brushless direct current machine drive system,” (2021) Applied Sciences (Switzerland), 11 (3), no. 1029, pp. 1 – 14.
Arel E., Mert A.C., “Field simulation of settlement analysis for shallow foundation using cone penetration data,” (2021) Probabilistic Engineering Mechanics, 66, no. 103169.
Atalay S., Çakmak G., Fonseca M., Schimmel M., Yilmaz B., “Effect of thermocycling on the surface properties of CAD-CAM denture base materials after different surface treatments,” (2021) Journal of the Mechanical Behavior of Biomedical Materials, 121, no. 104646.
Akleman E., Akgun T., “Caricature Creation with Conformal Mapping in Complex Domain,” (2021) Special Interest Group on Computer Graphics and Interactive Techniques Conference Posters, SIGGRAPH 2021, no. 3469149.
Beglarigale A., Eyice D., Tutkun B., Yazıcı H., “Evaluation of enhanced autogenous self-healing ability of UHPC mixtures,” (2021) Construction and Building Materials, 280, no. 122524.
Hilles S.M.S., Saleh N.S., “Image Segmentation and Classification Using CNN Model to Detect Brain Tumors,” (2021) 2nd International Informatics and Software Engineering Conference, IISEC 2021.
Baydan S.S., Ceylan M., Tuncay R.N., “A Study on the State of Health of Lithium-ion Batteries,” (2021) 2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021, pp. 509 – 513.
Uyar A., Sengul Y.A., “Rejection threshold optimization using 3D ROC curves: Novel findings on biomedical datasets,” (2021) International Journal of Intelligent Systems and Applications in Engineering, 9 (1), pp. 22 – 27.
Hilles S.M.S., Liban A., Miaikil O.A.M., Mahmoud Altrad A., Baker El-Ebiary Y.A., Hilles M.M., Contreras J., “Latent fingerprint enhancement and segmentation technique based on hybrid edge adaptive DTV model,” (2021) 2021 2nd International Conference on Smart Computing and Electronic Enterprise: Ubiquitous, Adaptive, and Sustainable Computing Solutions for New Normal, ICSCEE 2021, pp. 8 – 13.
Ozdal T., Tomas M., Toydemir G., Kamiloglu S., Capanoglu E., “Introduction to nutraceuticals, medicinal foods, and herbs,” (2021) Aromatic Herbs in Food: Bioactive Compounds, Processing, and Applications, pp. 1 – 34.
Özok A.F., “Mathematical Philosophy and Fuzzy Logic,”(2021) Advances in Intelligent Systems and Computing, 1197 AISC, pp. 32 – 35.
Dai X., Ren Q., Aydın S., Yardımcı M.Y., Lesage K., De Schutter G., “Enhancing thixotropy and structural build-up of alkali-activated slag/fly ash pastes with nano clay,” (2021) Materials and Structures/Materiaux et Constructions, 54 (4), no. 163.
Nikbay Oylum K., Akgun B.T., “Estimation of Home Energy Consumption and a Consumption Model Proposal,” (2020) 2020 Turkish National Software Engineering Symposium, UYMS 2020 - Proceedings, no. 9247019.
Yalcin A.S., Kilic H.S., Guler E., “Research and development project selection via IF-DEMATEL and IF-TOPSIS,” (2020) Advances in Intelligent Systems and Computing, 1029, pp. 625 – 633.
Karakaş E., Turhan Yöndem M., “Performance-based evaluation of computational thinking skills using machine learning,” (2020) 2020 Turkish National Software Engineering Symposium, UYMS 2020 - Proceedings, no. 9247066.
Serter B., Kıvanç Ö.C., Üstün Ö., “Design and analysis of traction system for electric kick scooters,” (2020) 2020 12th International Conference on Electrical and Electronics Engineering, ELECO 2020, no. 09317110, pp. 233 – 236.
Kıvanç Ö.C., Akgün B.T., Bilgen S., Öztürk S.B., Baysan S., Tuncay R.N., “Designing a smart home energy management system to improve cost/comfort factor,” (2020) 2020 12th International Conference on Electrical and Electronics Engineering, ELECO 2020, no. 09317130, pp. 44 – 48.
Coskun B., Akgün B.T., “A Proposed System for Forecasting of Personal Cash Flow and Saving Prediction,” (2020) 2020 Turkish National Software Engineering Symposium, UYMS 2020 - Proceedings, no. 9247049.
Mert A.C., Arel E., Önalp A., “The spatial distribution of liquefaction susceptibility by logistic regression model adapted for Adapazari, Turkey,” (2020) Teknik Dergi/Technical Journal of Turkish Chamber of Civil Engineers, 31 (2), pp. 9851 – 9868.
Ozaydin F., Altintas A.A., “Parameter estimation with Dzyaloshinskii–Moriya interaction under external magnetic fields,” (2020) Optical and Quantum Electronics, 52 (2), no. 70.
Shakhmurov V., “Nonlocal Fractional Differential Equations and Applications,” (2020) Complex Analysis and Operator Theory, 14 (4), no. 49.
Ustun O., Kivanc O.C., Mokukcu M.S., “A linear brushless direct current motor design approach for seismic shake tables,” (2020) Applied Sciences (Switzerland), 10 (21), no. 7618, pp. 1 – 13.
Pekmezci A., Sevgi L., “Properties of metamaterial based electromagnetic absorbers and shields,” (2019) 2019 5th International Electromagnetic Compatibility Conference, EMC Turkiye 2019, no. 8976017.
Yolci Omeroglu P., Acoglu B., Özdal T., Tamer C.E., Çopur Ö.U., “Extraction techniques for plant-based bio-active compounds,” (2019) Natural Bio-active Compounds: Chemistry, Pharmacology and Health Care Practices, 2, pp. 465 – 492.
Er F., Yalman Y., “Adaptive Multiple Peak and Histogram based Reversible Data Hiding,” (2019) 2019 9th International Conference on Image Processing Theory, Tools and Applications, IPTA 2019, no. 8936093.
Dogueri A.K., Nejat Tuncay R., Ustun O., “Evaluation of Developments in Vehicle Active Suspension Actuators and Control Systems Based on Patent Information Analysis Approach,” (2019) ELECO 2019 - 11th International Conference on Electrical and Electronics Engineering, no. 8990442, pp. 860 – 864.
Incereis N., Akgun B.T., “A Remote Program Loading Service Design and Implementation,” (2020) 2020 Turkish National Software Engineering Symposium, UYMS 2020 - Proceedings, no. 9247016.
Yiteter H., Beglarigale A., Aydin S., Baradan B., “Corrosion behavior of rebars embedded in alkali-activated and conventional reactive powder concretes,” (2020) Teknik Dergi/Technical Journal of Turkish Chamber of Civil Engineers, 31 (6), pp. 10359 – 10378.
Meydanli Atalay H., Ozden S., “Cyclic Behavior of Beam-Column Connections in Precast Structures,” (2021) Frontiers in Built Environment, 7, no. 639778.
Cakir H., Incereis N., Akgun B.T., Tastemir A.S.Y., “Comparison of Sampling Methods Using Machine Learning and Deep Learning Algorithms with an Imbalanced Data Set for the Prevention of Violence Against Physicians,” (2021) 2021 Turkish National Software Engineering Symposium, UYMS 2021 – Proceedings.
Deriszadeh A., Karabasoglu O., Ozturk S.B., “Excitation procedure for brushless woundrotor synchronous starter generator with seamless transitions,” (2019) IET Power Electronics, 12 (11), pp. 2873 – 2883.
Contreras J.O., Hilles S., Bakar Z.A., “Essay question generator based on bloom's taxonomy for assessing automated essay scoring system,” (2021) 2021 2nd International Conference on Smart Computing and Electronic Enterprise: Ubiquitous, Adaptive, and Sustainable Computing Solutions for New Normal, ICSCEE 2021, pp. 55 – 62.
Apaydin G., Sevgi L., “Diffraction at rounded edges,” (2019) 2019 5th International Electromagnetic Compatibility Conference, EMC Turkiye 2019, no. 8976006.
Gediz Ilis G., Demir H., Mobedi M., Baran Saha B., “A new adsorbent bed design: Optimization of geometric parameters and metal additive for the performance improvement,” (2019) Applied Thermal Engineering, 162, no. 114270.
Ozturk S.B., Kivanc O.C., Aksoz A., Hegazy O., “Rotor position alignment of FSTPI based PMSM drive using low frequency signal injection,” (2020) Applied Sciences (Switzerland), 10 (21), no. 7397, pp. 1 – 13.
Dai X., Aydın S., Yardımcı M.Y., Lesage K., De Schutter G., “Effects of activator properties and GGBFS/FA ratio on the structural build-up and rheology of AAC,” (2020) Cement and Concrete Research, 138, no. 106253.
Ozgun O., Sahin V., Erguden M.E., Apaydin G., Yilmaz A.E., Kuzuoglu M., Sevgi L., “PETOOL v2.0: Parabolic Equation Toolbox with evaporation duct models and real environment data,” (2020) Computer Physics Communications, 256, no. 107454.
Yazar M., Ozbek P., “Revisiting allostery in CREB-binding protein (CBP) using residue-based interaction energy,” (2020) Journal of Computer-Aided Molecular Design, 34 (9), pp. 965 – 974.
Wang Y., Aksoz A., Geury T., Ozturk S.B., Kivanc O.C., Hegazy O., “A review of modular multilevel converters for stationary applications,” Applied Sciences, 10(21), 7719.
Baker El-Ebiary Y.A., Hatamleh A., Aseh K., Altrad A., Amayreh K.T., Hilles S., Mohamed R.R., Ravindran Pathmanathan P., Aledinat L.S., “Blockchain as a decentralized communication tool for sustainable development,” (2021) 2021 2nd International Conference on Smart Computing and Electronic Enterprise: Ubiquitous, Adaptive, and Sustainable Computing Solutions for New Normal, ICSCEE 2021, pp. 127 – 133.
Kara B., Kalkan H., “Cloth Combine Estimation System Using Deep Learning,” (2020) Proceedings - 2020 Innovations in Intelligent Systems and Applications Conference, ASYU 2020, no. 9259804.
Erkal G., Kilic H.S., Kalender Z.T., Yalcin A.S., Tuzkaya G., “An Integrated IVIF-DEMATEL and IVIF-TOPSIS Methodology for Hotel Information System Selection,” (2021) Advances in Intelligent Systems and Computing, 1197 AISC, pp. 381 – 389.
Kivanc O.C., Ustun O., “Dynamic control of electronic differential in the field weakening region,” (2019) International Journal of Electronics, 106 (10), pp. 1583 – 1601.
Espinosa H.G., Sevgi L., “Effective electromagnetics teaching, no matter what! ,” (2021) 2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings, pp. 1475 – 1476.
Hilles S.M.S., Liban A.D., Altrad A.M.M., El-Ebiary Y.A.B., Hilles M.M., “Latent fingerprint enhancement based on EDTV model,” (2021) Handbook of Research on Applied Data Science and Artificial Intelligence in Business and Industry, pp. 431 – 446.
Yildirim P., Ceken K., “Discovery of the Similarities for Parasites,” (2020) 2020 Turkish National Software Engineering Symposium, UYMS 2020 - Proceedings, no. 9247052.
Hum S.V., Sevgi L., “From Engineering Electromagnetics to Electromagnetic Engineering: Teaching/Training Next Generations,” (2020) IEEE Antennas and Propagation Magazine, 62 (2), no. 9051758, pp. 12 – 13.
Kivanc O.C., Ozgonenel O., Bostan O., “New Generation Plug-in Cable Design and Product Development for White Goods - Cold Plug,” (2019) ELECO 2019 - 11th International Conference on Electrical and Electronics Engineering, no. 8990475, pp. 39 – 43.
Alcan P., “Internet of Things (loT) in Healthcare Systems,” (2020) Internet of Things (IoT) Applications for Enterprise Productivity, pp. 62 – 90.
Terzi E., Ufuk Tureli M.S., Tureli D.K., “A Game Theoretic Study for Distributed Multiprotocol Coexistence in ISM Band,” (2020) 2020 19th International Symposium INFOTEH-JAHORINA, INFOTEH 2020 - Proceedings, no. 9066342.
Kelleci B., “Replica bias circuit for common-source amplifier,” (2020) Turkish Journal of Electrical Engineering and Computer Sciences, 28 (4), pp. 2158 – 2164.
Hilles S.M.S., Liban A., Altrad A.M., Miaikil O.A.M., El-Ebiary Y.A.B., Contreras J., Hilles M.M., “Adaptive latent fingerprint image segmentation and matching using Chan-vese technique based on EDTV model,” (2021) 2021 2nd International Conference on Smart Computing and Electronic Enterprise: Ubiquitous, Adaptive, and Sustainable Computing Solutions for New Normal, ICSCEE 2021, pp. 2 – 7.
Habeeb R.J.H., Hilles S.M.S., Momani A.M., “Social Commerce Adoption Based UTAUT Model for Consumer Behavior: Iraq Small and Medium Enterprise,”(2021) 2nd International Informatics and Software Engineering Conference, IISEC 2021.
Kilic H.S., Yalcin A.S., “Modified two-phase fuzzy goal programming integrated with IF-TOPSIS for green supplier selection,” (2020) Applied Soft Computing Journal, 93, no. 106371.
Yarman T., Zaim N., Arik M., Kholmetskii A., Yarman O., “Diatomic molecules’ enigmatic constancy as the product of their dissociation energy and interatomic distance,” (2021) Molecular Physics, 119 (7), no. e1871087.
Khairullah A.K., Tureli U., Kivanc D., “Distributed Cooperative and Noncooperative Joint Power and Beamforming Adaptation Game for MIMO Sensor Network,” (2020) Proceedings of 2020 1st Information Technology to Enhance E-Learning and other Application Conference, IT-ELA 2020, no. 9253098, pp. 127 – 131.
Otay I., Jaller M., “Multi-criteria and multi-expert wind power farm location selection using a pythagorean fuzzy analytic hierarchy process,” (2020) Advances in Intelligent Systems and Computing, 1029, pp. 905 – 914.
Yalcin A.S., Kilic H.S., Caglayan N., “An integrated model with interval valued neutrosophic sets for the selection of lean and sustainable suppliers,” (2020) Advances in Intelligent Systems and Computing, 1029, pp. 693 – 701.
Çakmak G., Subaşı M.G., Yilmaz B., “Effect of thermocycling on the surface properties of resin-matrix CAD-CAM ceramics after different surface treatments,” (2021) Journal of the Mechanical Behavior of Biomedical Materials, 117, no. 104401.
Yazar M., Özbek P., “In Silico Tools and Approaches for the Prediction of Functional and Structural Effects of Single-Nucleotide Polymorphisms on Proteins: An Expert Review,” (2021) OMICS A Journal of Integrative Biology, 25 (1), pp. 23 – 37.
Beglarigale A., Eyice D., Seki Y., Yazıcı H., “Microencapsulation of Isophorone Diisocyanate with Silica Shell,” (2021) RILEM Bookseries, 33, pp. 105 – 118.
Kasasbeh A., Kelleci B., Ozturk S.B., Aksoz A., Hegazy O., “Sepic converter with an lc regenerative snubber for ev applications,” (2020) Energies, 13 (21), no. 5767.
Sevgi L., “Modeling and Simulation Challenges in Wide Ocean Area Surveillance,” (2019) IEEE Access, 7, no. 8743483, pp. 117692 – 117698.
Söyleyici Cergel M., Demir E., Atay F., “The effect of the structural, optical, and surface properties of anatase-TiO2 film on photocatalytic degradation of methylene blue organic contaminant,” (2019) Ionics, 25 (9), pp. 4481 – 4492.
Ozdal T., Yolci-Omeroglu P., Tamer E.C., “Role of encapsulation in functional beverages,” (2019) Biotechnological Progress and Beverage Consumption: Volume 19: The Science of Beverages, pp. 195 – 232.
Gediz Ilis G., Demir H., “Influence of bed thickness and particle size on performance of microwave regenerated adsorption heat pump,” (2018) International Journal of Heat and Mass Transfer, 123, pp. 16 – 24.
Kivanç Ö.C., Mungan T.E., Atila B., Tosun G., “An integrated approach to development of unmanned ground vehicle: Design, analysis, implementation and suggestions,” (2019) Journal of the Faculty of Engineering and Architecture of Gazi University, 34 (4), pp. 1957 – 1973.
Otay İ., Kahraman C., “Analytic network process with neutrosophic sets,” (2019) Studies in Fuzziness and Soft Computing, 369, pp. 525 – 542.
Ustun O., Bayram D., Durak B., Kivanc O.C., “Comparison of different line start interior permanent magnet synchronous motor types with respect to IE4 efficiency class,” (2017) 2017 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, ISEF 2017, no. 8090744.
Atila B., Kelleci B., “Recursive odd-even sorter for vector quantizer,” (2017) 2017 6th International Conference on Modern Circuits and Systems Technologies, MOCAST 2017, no. 7937665.
Otay İ., Kahraman C., “A state-of-the-art review of neutrosophic sets and theory,” (2019) Studies in Fuzziness and Soft Computing, 369, pp. 3 – 24.
Akay O., Özer A.T., Fox G.A., Wilson G.V., “Fiber reinforced sandy slopes under groundwater return flow,” (2018) Journal of Irrigation and Drainage Engineering, 144 (5), no. 04018004-1.
Öktem E.K., Yazar M., Gulfidan G., Arga K.Y., “Cancer Drug Repositioning by Comparison of Gene Expression in Humans and Axolotl (Ambystoma mexicanum) During Wound Healing,” (2019) OMICS A Journal of Integrative Biology, 23 (8), pp. 389 – 405.
Dündar S., “Analysis of pedestrian crossing speed – The case of Istanbul,” (2017) Proceedings of the Institution of Civil Engineers: Municipal Engineer, 170 (1), pp. 29 – 37.
Emirler M.T., Aksun Güvenç B., “Multi-objective parameter space approach based controller and add-on disturbance observer design,” (2017) Journal of Mechanical Science and Technology, 31 (9), pp. 4447 – 4458.
Uslu M.A., Apaydin G., Sevgi L., “Finite difference time domain modeling of fringe waves,” (2017) Applied Computational Electromagnetics Society Journal, 32 (7), pp. 575 – 580.
Aptoula E., Koc S.G., “Attribute profiles without thresholds,” (2018) International Geoscience and Remote Sensing Symposium (IGARSS), 2018-July, no. 8519351, pp. 4507 – 4510.
Otay I., Senturk E., Çebi F., “An integrated fuzzy approach for classifying slow-moving items,” (2018) Journal of Enterprise Information Management, 31 (4), pp. 595 – 611.
Yildirim P., “Chronic Kidney Disease Prediction on Imbalanced Data by Multilayer Perceptron: Chronic Kidney Disease Prediction,” (2017) Proceedings - International Computer Software and Applications Conference, 2, no. 8029917, pp. 193 – 198.
Koc S.G., Aptoula E., “Hyperspectral image classification with convolutional networks trained with self-dual attribute profiles,” (2017) 2017 25th Signal Processing and Communications Applications Conference, SIU 2017, no. 7960208.
Hayirli I.H., Kelleci B., Kivanc O.C., Ozturk S.B., Tuncay R.N., Citci M.O., “Design and Analysis of 240 Watt SEPIC Converter for LED Applications,” (2019) IEEE International Symposium on Industrial Electronics, 2019-June, no. 8781396, pp. 804 – 809.
Hacivelioglu F., Apaydin G., Sevgi L., Ufimtsev P.Y., “Diffraction at trilateral cylinders with combinations of soft and hard faces: first-order PTD approximation,” (2018) Electromagnetics, 38 (4), pp. 217 – 225.
Majeed A., Ozturk S.B., Tureli D.K., “An encoder fault tolerant FPGA based robot control using bluetooth of a smart phone,” (2017) 2017 10th International Conference on Electrical and Electronics Engineering, ELECO 2017, 2018-January, pp. 1336 – 1341.
Pekmezci A., Topuz E., Sevgi L., “First and second order mur type ABCs for DNG media,” (2018) Applied Computational Electromagnetics Society Journal, 33 (6), pp. 569 – 574.
Demir E., “Sensitive and selective pathway of total antioxidant capacity in commercially lemon, watermelon and mango-pineapple cold teas by square wave adsorptive stripping voltammetry,” (2019) Gazi University Journal of Science, 32 (4), pp. 1123 – 1136.
Yardim M.S., Değer Şitilbay B., Dündar S., “Modeling the effects of hydrated lime additives on asphalt mixtures by fuzzy logic and ANN,” (2019) Teknik Dergi/Technical Journal of Turkish Chamber of Civil Engineers, 30 (6), pp. 9533 – 9559.
Otay İ., Kahraman C., “Six sigma project selection using interval neutrosophic TOPSIS,” (2018) Advances in Intelligent Systems and Computing, 643, pp. 83 – 93.
Kivanc O.C., Ozturk S.B., “Sector determination for SVPWM based four-switch three-phase VSI,” (2017) Electronics Letters, 53 (5), pp. 343 – 345.
Shakhmurov V., Shahmurov R., “The dynamics of a cancer tumor growth model with multiphase structure,” (2018) WMSCI 2018 - 22nd World Multi-Conference on Systemics, Cybernetics and Informatics, Proceedings, 3, pp. 194 – 199.
Yildirim P., “Classification with incomplete data and ensemble learners for the prediction of cervical cancer risk,” (2018) ACM International Conference Proceeding Series, pp. 1 – 5.
Ustun O., Kivanc O.C., Senol S., Fincan B., “On field weakening performance of a brushless direct current motor with higher winding inductance: Why does design matter?,” (2018) Energies, 11 (11), no. 3119.
Emirler M.T., “Graphical two-term control system design considering time delay margin and time-integral performance criterion,” (2018) Electronics Letters, 54 (23), pp. 1319 – 1320.
Khiarullah A.K., Tureli U., Kivanc D., “Optimized intelligent design for smart systems hybrid beamforming and power adaptation algorithms for sensor networks decision-making approach,” (2019) International Journal of Computational Intelligence Systems, 12 (2), pp. 1436 – 1445.
Gunduz G., Yaman C., Peker A.U., Acarman T., “Prediction of Risk Generated by Different Driving Patterns and Their Conflict Redistribution,”(2018) IEEE Transactions on Intelligent Vehicles, 3 (1), pp. 71 – 80.
Kivanc O.C., Ozturk S.B., “Low-cost position sensorless speed control of PMSM drive using four-switch inverter,” (2019) Energies, 12 (4), no. 741.
Kivanc O.C., Ustun O., Tosun G., Oguz E., Mutlu Y., “Design and implementation of an electric actuated valve for precise fluid control,” (2019) Gazi University Journal of Science, 32 (2), pp. 483 – 492.
Sevgi L., Karim M.F., Chandrasekaran K.T., “Short Visits to Iran and India: Invitations from the IEEE Student Branches,” (2019) IEEE Antennas and Propagation Magazine, 61 (2), no. 8681533, pp. 109 – 111.
Emirler M.T., Güvenç L., Güvenç B.A., “Design and Evaluation of Robust Cooperative Adaptive Cruise Control Systems in Parameter Space,” (2018) International Journal of Automotive Technology, 19 (2), pp. 359 – 367.
Ozturk S.B., Kivanc O.C., Atila B., Rehman S.U., Akin B., Toliyat H.A., “A simple least squares approach for low speed performance analysis of indirect FOC induction motor drive using low-resolution position sensor,” (2017) 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017, no. 8002156.
Kahraman C., Otay İ., Öztayşi B., Onar S.Ç., “An integrated AHP & DEA methodology with neutrosophic sets,” (2019) Studies in Fuzziness and Soft Computing, 369, pp. 623 – 645.
Üstün Ö., Tuncay R.N., Mökükcu M.S., Kivanç Ö.C., Tosun G., Gökçe C., Çakan M., “An integrated approach for the development of an electric vehicle powertrain: Design, analysis, and implementation,” (2018) Turkish Journal of Electrical Engineering and Computer Sciences, 26 (3), pp. 1541 – 1554.
Apaydin G., Sevgi L., Ufimtsev P.Y., “Comments on “Wave diffraction by a soft/hard strip: Modified theory of physical optics solution” ,” (2018) Optik, 166, pp. 90 – 94.
Ilis G.G., Demir H., “Effect of volume of evaporator and bed heat exchanger on performance of adsorption chiller,” (2018) Proceedings of the Thermal and Fluids Engineering Summer Conference, 2018-March, pp. 1515 – 1522.
Tomas M., Toydemir G., Boyacioglu D., Hall R.D., Beekwilder J., Capanoglu E., “Processing black mulberry into jam: effects on antioxidant potential and in vitro bioaccessibility,” (2017) Journal of the Science of Food and Agriculture, 97 (10), pp. 3106 – 3113.
Sahin E., Bektur E., Burukoglu Donmez D., Baycu C., Can O.D., Sahinturk V., “Mirtazapine suppresses sterile inflammation through NLRP3-inflammasome in diabetic rat kidney,” (2019) Acta Histochemica, 121 (3), pp. 289 – 296.
Otay İ., Oztaysi B., Cevik Onar S., Kahraman C., “Multi-expert performance evaluation of healthcare institutions using an integrated intuitionistic fuzzy AHP&DEA methodology,” (2017) Knowledge-Based Systems, 133, pp. 90 – 106.
Apaydin G., Sevgi L., Ufimtsev P.Y., “Diffraction at rounded wedges: MoM modeling of PTD fringe waves,” (2017) Applied Computational Electromagnetics Society Journal, 32 (7), pp. 600 – 607.
Sahin G., Aydın F., Kelleci Y., Canturk M.T., “Massive carbuncle in a patient with diabetes mellitus,” (2019) Journal of Experimental and Clinical Medicine (Turkey), 36 (1), pp. 31 – 33.
Apaydin G., Sevgi L., “A MATLAB-Based Virtual Tool for Simulations of Wave Propagation Inside a Parallel-Plate Waveguide,” (2017) IEEE Antennas and Propagation Magazine, 59 (4), no. 8002701, pp. 100 – 105.
Suulker C., Emirler M.T., “Comparison of different time delay compensation methods for networked DC motor speed control,” (2019) Proceedings - 2019 6th International Conference on Electrical and Electronics Engineering, ICEEE 2019, no. 8792500, pp. 225 – 229.
Sevgi L., “From Engineering Electromagnetics to Electromagnetic Engineering: Teaching/Training Next Generations,” (2019) 13th European Conference on Antennas and Propagation, EuCAP 2019, no. 8739998.
Koc S.G., Aptoula E., Bosilj P., Damodaran B.B., Mura M.D., Lefevre S., “A comparative noise robustness study of tree representations for attribute profile construction,” (2017) 2017 25th Signal Processing and Communications Applications Conference, SIU 2017, no. 7960159.
Aksu O., Iban M.C., “Considerations on the land management system approach in Turkey by the experiences of a case study,” (2019) Survey Review, 51 (364), pp. 87 – 96.
Yildirim P., Kaya A., “Clustering of phentermine HCl drug from online patient medication reviews,” (2019) Procedia Computer Science, 151, pp. 1146 – 1151.
Beglarigale A., Vahedi H., Eyice D., Yazici H., “Novel Test Method for Assessing Bonding Capacity of Self-Healing Products in Cementitious Composites,” (2019) Journal of Materials in Civil Engineering, 31 (4), no. 04019028.
Toklu Y.C., Bekdaş G., Temür R., “Analysis of cable structures through energy minimization,” (2017) Structural Engineering and Mechanics, 62 (6), pp. 749 – 758.
Kivanc O.C., Ozturk S.B., “Sensorless PMSM Drive Based on Stator Feedforward Voltage Estimation Improved with MRAS Multiparameter Estimation,” (2018) IEEE/ASME Transactions on Mechatronics, 23 (3), pp. 1326 – 1337.
Norouzi P., Kivanç O.C., Üstün Ö., “High performance position control of double sided air core linear brushless DC motor,” (2017) 2017 10th International Conference on Electrical and Electronics Engineering, ELECO 2017, 2018-January, pp. 233 – 238.
Kemer B., Demir E., “A novel potentiometric pH electrode based on sulfated natural Fe3O4 and analytical application in food samples,” (2018) Journal of Food Measurement and Characterization, 12 (4), pp. 2256 – 2262.
Sevgi L., “Electromagnetic diffraction modeling: High frequency asymptotics vs. numerical techniques,” (2017) Applied Computational Electromagnetics Society Journal, 32 (7), pp. 555 – 561.
Öner I., Eldem V., “Necessary and sufficient conditions for global asymptotic stability of a class of bimodal systems with discontinuous vector fields,” (2018) IMA Journal of Mathematical Control and Information, 35 (4), pp. 1129 – 1155.
Kivanç Ö.C., “An approach to improve the performance of cooperative unmanned vehicle team,” (2019) Turkish Journal of Electrical Engineering and Computer Sciences, 27 (2), pp. 1428 – 1444.
Toklu Y.C., Cercevik A.E., Kandemir S.Y., Yayli M.O., “Production of lunar soil simulant in Turkey,” (2017) Proceedings of 8th International Conference on Recent Advances in Space Technologies, RAST 2017, no. 8002977, pp. 1 – 5.
El-Etriby A.E., Klingner A., Tabak A.F., Khalil I.S.M., “Manipulation of Non-Magnetic Microbeads Using Soft Microrobotic Sperm,” (2018) MARSS 2018 - International Conference on Manipulation, Automation and Robotics at Small Scales, no. 8481164.
Apaydin G., Sevgi L., Ufimtsev P.Y., “Extension of PTD for Finite Objects with Rounded Edges: Diffraction at a Soft Trilateral Cylinder,” (2017) IEEE Antennas and Wireless Propagation Letters, 16, no. 8000566, pp. 2590 – 2593.
Apaydin G., Sevgi L., “Diffraction and fringe effects in EMC problems,” (2017) 2017 4th International Electromagnetic Compatibility Conference, EMC Turkiye 2017, no. 8090384.
Karamuk M., Ozturk S.B., “Design of a Controller for Torsional Vibrations of an Electric Vehicle Powertrain,” (2019) Proceedings 2019 International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2019 and 2019 International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2019, no. 9007126, pp. 583 – 589.
Ozdal T., Yalcinkaya İ.E., Toydemir G., Capanoglu E., “Polyphenol-protein interactions and changes in functional properties and digestibility,” (2018) Encyclopedia of Food Chemistry, pp. 566 – 577.
Toklu Y.C., Çerçevik A.E., “Space research and extraterrestrial construction industry,” (2017) Proceedings of 8th International Conference on Recent Advances in Space Technologies, RAST 2017, no. 8002938, pp. 11 – 15.
Pak B.K., Albayrak Y.E., Erensal Y.C., “Renewable Energy Perspective for Turkey Using Sustainability Indicators,” (2015) International Journal of Computational Intelligence Systems, 8 (1), pp. 187 – 197.
Ilis G.G., “Cop improvement of electric vehicle battery thermal management system with an adsorption heat pump,” (2017) Proceedings of the Thermal and Fluids Engineering Summer Conference, 2017-April, pp. 2495 – 2503.
Farnsworth C.B., Ozer A.T., Bartlett S.F., Lawton E.C., “Comparison of methodologies for establishing design properties of horizontal drainage in soft cohesive soils,” (2015) Transportation Research Record, 2511, pp. 1 – 8.
Bolukbas D., Ozer A.Z., “Parametric analysis and optimisation of a 8-18 GHz quad-ridged horn antenna,” (2015) Progress in Electromagnetics Research Symposium, 2015-January, pp. 1172 – 1177.
Bolukbas D., Ozer A.Z., “Optimization of a reflector antenna fed by a double ridged horn,” (2015) IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), 2015 October, no. 7305487, pp. 2197 – 2198.
Tolga Özer A., Akay O., “Interface shear strength characteristics of interlocked EPS-block geofoam,” (2016) Journal of Materials in Civil Engineering, 28 (4), no. 04015156.
Ustun O., Cakan M., Tuncay R.N., Mokukcu M.S., Kivanc O.C., Mutlu Y., Tosun G. “Design and manufacture of electric powertrain and its cooling system for ITU EV project,” (2014) Proceedings - 2014 International Conference on Electrical Machines, ICEM 2014, no. 6960262, pp. 730 – 735.
Uslu A., Apaydin G., Sevgi L., “Diffraction Modeling by a Soft-Hard Strip Using Finite-Difference Time-Domain Method,” (2017) IEEE Antennas and Wireless Propagation Letters, 16, no. 7480846, pp. 306 – 309.
Kivanc O.C., Ozturk S.B., Tuncay R.N., Kesici E., Yazi C., “Electro-hydraulic power steering system modelling for parameter fault detection based on model reference adaptive frame,” (2016) IECON Proceedings (Industrial Electronics Conference), no. 7793788, pp. 1808 – 1814.
Emirler M.T., Kahraman K., Şentürk M., Acar O.U., Aksun Güvenç B., Güvenç L., Efendıoğlu B., “ Lateral stability control of fully electric vehicles,” (2015) International Journal of Automotive Technology, 16 (2), pp. 317 – 328.
Apaydin G., Hacivelioglu F., Sevgi L., Ufimtsev P.Y., “Fringe Waves from a Wedge With One Face Electric and the Other Face Magnetic,” (2016) IEEE Transactions on Antennas and Propagation, 64 (3), no. 7373573, pp. 1125 – 1130.
Turer I., Sevgi L., “DC magnetic compatibility of satellites,” (2016) International Journal of RF and Microwave Computer-Aided Engineering, 26 (4), pp. 330 – 334.
Ozgun O., Sevgi L., “Double-Tip diffraction modeling: 2-D numerical models versus high-frequency asymptotics,” (2015) IEEE Transactions on Antennas and Propagation, 63 (6), no. 7072461, pp. 2686 – 2693.
Apaydin G., Hacivelioglu F., Sevgi L., Gordon W.B., Ufimtsev P.Y., “Diffraction at a Rectangular Plate: First-Order PTD Approximation,” (2016) IEEE Transactions on Antennas and Propagation, 64 (5), no. 7421957, pp. 1891 – 1899.
Ozgun O., Sevgi L., “Finite element modeling of double-tip diffraction,” (2015) IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), 2015-October, no. 7305311, pp. 1844 – 1845.
Ghazi M.M., Yanikoglu B., Aptoula E., Muslu O., Ozdemir M.C., “Sabanci-Okan system in LifeCLEF 2015 plant identification competition,” (2015) CEUR Workshop Proceedings, 1391.
Apaydin G., Lu C.-C., Sevgi L., Chew W.C., “A Groundwave Propagation Model Using a Fast Far-Field Approximation (2017) IEEE Antennas and Wireless Propagation Letters, 16, no. 7776768, pp. 1369 – 1372.
Apaydin G., Sevgi L., “Three-dimensional split-step-fourier and finite difference time domain-based rectangular waveguide filter simulators: Validation, verification, and calibration,” (2016) International Journal of RF and Microwave Computer-Aided Engineering, 26 (8), pp. 660 – 667.
Kivanc O.C., Ozturk S.B., “MATLAB function based approach to FOC of PMSM drive,” (2016) Proceedings - EMS 2015: UKSim-AMSS 9th IEEE European Modelling Symposium on Computer Modelling and Simulation, no. 7579812, pp. 96 – 102.
Apaydin G., Sevgi L., “A novel wedge diffraction modeling using method of moments (MoM) ,” (2015) Applied Computational Electromagnetics Society Journal, 30 (10), pp. 1053 – 1058.
Tureli D.K., Ali U., “Effect of user traffic load on design of energy harvesting cellular base station,” (2016) 2016 24th Signal Processing and Communication Application Conference, SIU 2016 - Proceedings, no. 7496025, pp. 1457 – 1460.
Kamiloglu S., Toydemir G., Boyacioglu D., Beekwilder J., Hall R.D., Capanoglu E., “A Review on the Effect of Drying on Antioxidant Potential of Fruits and Vegetables,” (2016) Critical Reviews in Food Science and Nutrition, 56, pp. S110 - S129.
Aptoula E., “Hyperspectral Image Classification with Multidimensional Attribute Profiles,” (2015) IEEE Geoscience and Remote Sensing Letters, 12 (10), no. 7138556, pp. 2031 – 2035.
Pekmezci A., Topuz E., Sevgi L., “Finite difference time domain formulation for epsilon-negative medium using wave equation,” (2016) International Journal of RF and Microwave Computer-Aided Engineering, 26 (4), pp. 304 – 310.
Ozkan B., Aptoula E., Heren A.T., Mandaci H., “Optimisation of tractor semi-trailer command steering mechanism using a genetic algorithm,” (2016) International Journal of Vehicle Design, 71 (1), pp. 258 – 278.
Yildirim P., “Association patterns in open data to explore ciprofloxacin adverse events,” (2015) Applied Clinical Informatics, 6 (4), pp. 728 – 747.
Uslu M.A., Apaydin G., Sevgi L., “Double tip diffraction modeling: Finite difference time domain vs. method of moments,” (2014) IEEE Transactions on Antennas and Propagation, 62 (12), no. 6966825, pp. 6337 – 6343.
Rahnama B., “Towards improved parallelism through order reduction of accessing data in nD matrices,” (2014) Journal of Supercomputing, 70 (2), pp. 977 – 986.
Bakir S., Toydemir G., Boyacioglu D., Beekwilder J., Capanoglu E., “Fruit antioxidants during vinegar processing: Changes in content and in vitro bio-accessibility,” (2016) International Journal of Molecular Sciences, 17 (10), no. 1658.
Ozdemir M.C., Aptoula E., Yanikoglu B., “Fruit detection with binary partition trees,” (2016) 2016 24th Signal Processing and Communication Application Conference, SIU 2016 - Proceedings, no. 7496082, pp. 1685 – 1688.
Demir E., İnam R., “Square Wave Voltammetric Determination of Fomesafen Herbicide Using Modified Nanostructure Carbon Paste Electrode as a Sensor and Application to Food Samples,” (2017) Food Analytical Methods, 10 (1), pp. 74 – 82.
Demir E., Inam R., Ozkan S.A., Uslu B., “Electrochemical behavior of tadalafil on TiO2 nanoparticles–MWCNT composite paste electrode and its determination in pharmaceutical dosage forms and human serum samples using adsorptive stripping square wave voltammetry,” (2014) Journal of Solid State Electrochemistry, 18 (10), pp. 2709 – 2720.
Sari G., Yazar M., Tozkir H., Duymaz J., Gürkan H., “Identification of a novel HLA-A*26 allele, HLA-A*26:01:36, in a Turkish family by sequence-based typing,” (2014) Tissue Antigens, 84 (6), pp. 580 – 581.
Sever C., Nikbay K., Akgün B.T., “PeTraLi: A simulation for the observation of drivers' experiences assisted personal traffic lights,” (2016) ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering, no. 7394458, pp. 709 – 713.
Apaydin G., Sevgi L., “Method of moments modeling of backscattering by a soft-hard strip,” (2015) IEEE Transactions on Antennas and Propagation, 63 (12), no. 7268863, pp. 5822 – 5826.
Ozkan G., Kamiloglu S., Ozdal T., Boyacioglu D., Capanoglu E., “Potential use of Turkish medicinal plants in the treatment of various diseases,” (2016) Molecules, 21 (3), no. 257.
Eldem V., Şahan G., “The effect of coupling conditions on the stability of bimodal systems in R3,”(2016) Systems and Control Letters, 96, pp. 141 – 150.
Sevgi L., “Electromagnetic modeling and simulation,” (2015) ICCEM 2015 - 2015 IEEE International Conference on Computational Electromagnetics no. 7052538, pp. 13 – 15.
Şaşmaz Kuru T., Şentürk E., “Humidity sensing properties of ferrite based Al-Cd nanoparticles as a fast response sensor device,” (2016) Sensors and Actuators, A: Physical, 249, pp. 62 – 67.
Ahmed A.A., Özkan B., “Using of fuzzy pid controller to improve vehicle stability for planar model and full vehicle models,” (2017) International Journal of Applied Engineering Research, 12 (5), pp. 671 – 680.
Demir E., İnam R., “Voltammetric behavior of bupirimate fungicide and its square wave voltammetric determination,” (2016) Ionics, 22 (2), pp. 269 – 276.
Akalp G., Ozok A.F., “How we can create an ergonomic culture in a company: An application in Turkey,” (2016) Advances in Intelligent Systems and Computing, 489, pp. 981 – 989.
Çakir G., Çakir M., Sevgi L., “An FDTD-based parallel virtual tool for RCS calculations of complex targets,” (2014) IEEE Antennas and Propagation Magazine, 56 (5), no. 6971919, pp. 74 – 90.
Lefèvre S., Aptoula E., Perret B., Weber J., “Morphological template matching in color images,” (2015) Lecture Notes in Computational Vision and Biomechanics, 11, pp. 241 – 277.
Aptoula E., Dalla Mura M., Lefevre S., “Vector Attribute Profiles for Hyperspectral Image Classification,” (2016) IEEE Transactions on Geoscience and Remote Sensing, 54 (6), no. 7387766, pp. 3208 – 3220.
Davari A.A., Aptoula E., Yanikoglu B., “On the effect of synthetic morphological feature vectors on hyperspectral image classification performance,” (2015) 2015 23rd Signal Processing and Communications Applications Conference, SIU 2015 - Proceedings, no. 7129909, pp. 653 – 656.
Apaydin G., Sevgi L., Ufimtsev P.Y., “Fringe integral equations for the 2-D wedges with soft and hard boundaries,” (2016) Radio Science, 51 (9), pp. 1570 – 1578.
Atila B., Mungan T.E., Kivanc O.C., “Different filter approaches and performance analysis of fundamental sensors in autonomous ground vehicles,” (2016) 2016 24th Signal Processing and Communication Application Conference, SIU 2016 - Proceedings, no. 7496062, pp. 1605 – 1608.
Tosun G., Kivanc O.C., Oguz E., Mutlu Y., Ustun O., “Design of a position controlled electric actuator used in fluid control valves,” (2016) Proceedings - 2016 IEEE International Power Electronics and Motion Control Conference, PEMC 2016, no. 7752055, pp. 551 – 556.
Ozgun O., Sevgi L., “Finite element modeling of fringe fields in wedge diffraction problem,” (2017) IEEE Antennas and Wireless Propagation Letters, 16, no. 7486111, pp. 369 – 372.
Gediz Ilis G., “Influence of new adsorbents with isotherm Type V on performance of an adsorption heat pump,” (2017) Energy, 119, pp. 86 – 93.
Karayahşi K., Tayyar I.H., Dolma A., “Hybrid TEM wave radiation from a coaxial waveguide with a semi-infinite PEC outer cylinder and an infinite inner cylinder loaded with partial impedance,” (2015) Progress in Electromagnetics Research Symposium, 2015-January, pp. 771 – 775.
Apaydin G., Sevgi L., “The Two-Dimensional Nonpenetrable Wedge Scattering Problem and a MATLAB-Based Fringe Wave Calculator Testing Ourselves,” (2016) IEEE Antennas and Propagation Magazine, 58 (2), no. 7450705, pp. 86 – 93.
Şahan G., Eldem V., “Well posedness conditions for Bimodal Piecewise Affine Systems,” (2015) Systems and Control Letters, 83, pp. 9 – 18.
Güven E.P., Karapınar-Kazandağ M., Tanalp J., “ Revascularization: A review of clinical reports on a contemporary treatment modality for endodontics,” (2017) Biomedical Research (India), 28 (2), pp. 644 – 656.
Eldem V., Öner I., “A note on the stability of bimodal systems in with discontinuous vector fields,” (2015) International Journal of Control, 88 (4), pp. 729 – 744.
Ahmed A.A., Özkan B., “Stability and dynamic control of four in-wheel motored vehicle using fuzzy PID controller,” (2016) International Journal of Mechanical and Mechatronics Engineering, 16 (3), pp. 108 – 112.
Yildirim P., “Pattern Classification with Imbalanced and Multiclass Data for the Prediction of Albendazole Adverse Event Outcomes,” (2016) Procedia Computer Science, 83, pp. 1013 – 1018.
Kivanc O.C., Ozturk S.B., “MATLAB function based approach to FOC of PMSM drive,” (2016) International Journal of Simulation: Systems, Science and Technology, 17 (33), pp. 2.1 - 2.8.
Kholmetskii A., Missevitch O., Yarman T., “Electric/magnetic dipolein an electromagnetic field: force, torque and energy,” (2014) Journal of Applied Genetics, 129 (10), no. 215.
Erol V., Ozaydin F., Altintas A.A., “Analysis of Negativity and Relative Entropy of Entanglement measures for qubit-qutrit Quantum Communication systems,” (2015) 2015 23rd Signal Processing and Communications Applications Conference, SIU 2015 - Proceedings, no. 7129800, pp. 116 – 119.
Sevgi L., “Electromagnetic precursors and earthquakes: Nowcasting, forecasting, and prediction,” (2014) IEEE Antennas and Propagation Magazine, 56 (6), no. 7011078, pp. 319 – 326.
Kivanc O.C., Ustun O., Tosun G., Tuncay R.N., “On regenerative braking capability of BLDC motor,” (2016) IECON Proceedings (Industrial Electronics Conference), no. 7793608, pp. 1710 – 1715.
Emirler M.T., Uygan I.M.C., Gelbal Ş.Y., Gözü M., Böke T.A., Güvenç B.A., Güvenç L., “Vehicle dynamics modelling and validation for hardware-in-the-loop testing of electronic stability control,” (2016) International Journal of Vehicle Design, 71 (1), pp. 191 – 211.
Yolci Omeroglu P., Ambrus Á., Boyacioglu D., Majzik E.S., “A Case Study to Assess the Sample Preparation Error in Pesticide Residue Analysis,” (2015) Food Analytical Methods, 8 (2), pp. 474 – 482.
Tosun G., Kivanc O.C., Oguz E., Ustun O., Tuncay R.N., “Development of high efficiency multi-output flyback converter for industrial applications,” (2016) ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering, no. 7394615, pp. 1102 – 1108.
Guldiken B., Toydemir G., Nur Memis K., Okur S., Boyacioglu D., Capanoglu E., “Home-processed red beetroot (Beta vulgaris L.) products: Changes in antioxidant properties and bioaccessibility,” (2016) International Journal of Molecular Sciences, 17 (6), no. 858.
Pekmezci A., Sevgi L., “FDTD-based metamaterial (MTM) modeling and simulation,” (2014) IEEE Antennas and Propagation Magazine, 56 (5), no. 6971970, pp. 289 – 303.
Koc E., Ozer A.N., “Comparative study of feature selection methods to analyze performance of lung cancer data,” (2015) Proceedings of the European Conference on Data Mining 2015, ECDM 2015 and International Conferences on Intelligent Systems and Agents 2015, ISA 2015 and Theory and Practice in Modern Computing 2015, TPMC 2015 - Part of the Multi Conference on Computer Science and Information Systems 2015, pp. 219 – 222.
Güvenç L., Aksun-Güvenç B., Demirel B., Emirler M.T., “Control of mechatronic systems,” (2017) Control of Mechatronic Systems, pp. 1 – 200.
Sevgi L., “Guest editorial: Challenges in RF and microwave defense engineering,” (2016) International Journal of RF and Microwave Computer-Aided Engineering, 26 (4), pp. 285 – 286.
Sevgi L., “Teaching electromagnetics via virtual tools,” (2015) IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), 2015-October, no. 7304898, pp. 1021 – 102.
Ustun O., Tanc G., Kivanc O.C., Tosun G., “In pursuit of proper BLDC motor design for electric bicycles,” (2016) Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016, no. 7732769, pp. 1808 – 181.
Omar A.A.A., Özkan B., “Analysis of effect of in-wheel electric motors mass on passive and active suspension systems,” (2015) ARPN Journal of Engineering and Applied Sciences, 10 (14), pp. 5924 – 5928.
Ozgun O., Apaydin G., Kuzuoglu M., Sevgi L., “Parabolic equation toolbox for radio wave propagation,” (2015) 2015 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2015 - Proceedings, no. 7303543, pp. 259.
Karayahşi K., Tayyar I.H., Dolma A., “Radiation from a coaxial waveguide formed by a semi-infinite cylindrical outer conductor and an infinite two-part impedance inner cylinder,” (2016) Journal of Electromagnetic Waves and Applications, 30 (7), pp. 898 – 914.
Shakhmurov V.B., “Nonlocal Navier-Stokes problems in abstract function spaces and applications,” (2015) Nonlinear Analysis: Real World Applications, 26, pp. 19 – 43.
Altay I., Aksun Güvenç B., Güvenç L., “Lidar data analysis for time to headway determination in the DriveSafe project field tests,” (2013) International Journal of Vehicular Technology, 2013, no. 749896.
Yanikoglu B., Yildiran S.T., Tirkaz C., Aptoula E., “Sabanci-Okan system at LifeCLEF 2014 Plant Identification Competition,” (2014) CEUR Workshop Proceedings, 1180, pp. 771 – 777.
Aptoula E., Korkmaz S., “Remote sensing image retrieval using morphological texture descriptors,” (2013) 2013 21st Signal Processing and Communications Applications Conference, SIU 2013, no. 6531225.
Aptoula E., “Remote sensing image retrieval with global morphological texture descriptors,” (2014) IEEE Transactions on Geoscience and Remote Sensing, 52 (5), no. 6557520, pp. 3023 – 3034.
Emirler M.T., Uygan I.M.C., Aksun Güvenç B., Güvenç L., “Robust PID steering control in parameter space for highly automated driving,” (2014) International Journal of Vehicular Technology, 2014, no. 259465.
Küçük F., Özer A.Z., Ogut E., Bölükbaş D., “Computer aided design and parametric analysis of rectangular microstrip patch antenna,” (2014) 2014 22nd Signal Processing and Communications Applications Conference, SIU 2014 - Proceedings, no. 6830547, pp. 1587 – 1590.
Ustun O., Yilmaz M., Mamedov H., Zada P.A., Tuncay R.N., “Valuations of adaptive methods for filtering out high-noises in oil complexes telemetry systems,” (2013) AICT 2013 - 7th International Conference on Application of Information and Communication Technologies, Conference Proceedings, no. 6722708.
Ekincioglu O., Gurgun A.P., Engin Y., Tarhan M., Kumbaracibasi S., “Approaches for sustainable cement production - A case study from Turkey,” (2013) Energy and Buildings, 66, pp. 136 – 142.
Usudum A., Bolukbas D., “The performance analyses of an induction motor due to specified fault conditions,” (2013) ELECO 2013 - 8th International Conference on Electrical and Electronics Engineering, no. 6713846, pp. 273 – 277.
Saynak U., Karahan S., Coşkun A.F., Yücedaǧ S.M., Aldirmaz S., Karabayir O., Yücedaǧ O.M., Çolak M.A., Ünal M., Bati B., Bati Ö., Tayyar I.H., Serim H.A., Hocaoǧlu A.K., Bölükbaş D., “Preliminary set of analysis for the assessment of wind turbines which are in the line-of-sight of radar, navigation and communications systems,” (2014) IET Radar, Sonar and Navigation, 8 (5), pp. 415 – 424.
Dinçmen E., Güvenç B.A., “A control strategy for parallel hybrid electric vehicles based on extremum seeking,” (2012) Vehicle System Dynamics, 50 (2), pp. 199 – 227.
Yildirim P., Bloice M., Holzinger A., “Knowledge discovery and visualization of clusters for erythromycin related adverse events in the FDA drug adverse event reporting system,” (2014) Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8401, pp. 101 – 116.
Uyar A., Seli E., “Metabolomic Assessment of Embryo Viability,” (2014) Seminars in Reproductive Medicine, 32 (2), pp. 141 – 151.
Holzinger A., Simonic K.-M., Yildirim P., “Disease-disease relationships for rheumatic diseases, Web-based biomedical textmining and knowledge discovery to assist medical decision making,” (2012) Proceedings - International Computer Software and Applications Conference, no. 6340213, pp. 573 – 580.
Yildirim P., Ekmekci I.O., Holzinger A., “On knowledge discovery in open medical data on the example of the FDA drug adverse event reporting system for alendronate (Fosamax) ,” (2013) Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7947 LNCS, pp. 195 – 206.
Ünal K., Güvenç L., Labs M., “Real-time hardware-in-the-loop simulation of time to rollover warning for heavy commercial vehicles,” (2014) International Journal of Heavy Vehicle Systems, 21 (2), pp. 105 – 122.
Shakhmurov V.B., “Stokes equations with small parameters in half plane,” (2014) Computers and Mathematics with Applications, 67 (1), pp. 91 – 105.
Muñoz M., Uyar A., Correia E., Díez C., Fernandez-Gonzalez A., Caamaño J.N., Trigal B., Carrocera S., Seli E., Gomez E., “Non-invasive assessment of embryonic sex in cattle by metabolic fingerprinting of in vitro culture medium,” (2014) Metabolomics, 10 (3), pp. 443 – 451.
Yolci Omeroglu P., Ambrus Á., Boyacioglu D., “Estimation of Sample Processing Uncertainty of Large-Size Crops in Pesticide Residue Analysis,” (2013) Food Analytical Methods, 6 (1), pp. 238 – 247.
Emirler M.T., Guvenc B.A., Guvenc L., “Communication disturbance observer approach to control of integral plant with time delay,” (2013) 2013 9th Asian Control Conference, ASCC 2013, no. 6606257.
Elçi A., Celik D., Orgun M.A., Rahnama B., Unland R., “The 9th IEEE International Workshop on Engineering Semantic Agents - Semantics, Agents and Intelligence (ESAS 2014) ,” (2014) Proceedings - IEEE 38th Annual International Computers, Software and Applications Conference Workshops, COMPSACW 2014, no. 6903085, pp. xxviii – xxx.
Segmen E., Uyar A., “Performance analysis of classification models for medical diagnostic decision support systems,” (2013) 2013 21st Signal Processing and Communications Applications Conference, SIU 2013, no. 6531316.
Yarman T., Kholmetskii A.L., Korfali O., “The classical adiabatic constancy of PVγ for an ideal gas, can be shown to be a quantum mechanical occurrence, which yields the particular value of the constant, in question,” (2012) Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology, 32 (1), pp. 59 – 65.
Özer A.T., Akay O., Fox G.A., Bartlett S.F., Arellano D., “A new method for remediation of sandy slopes susceptible to seepage flow using EPS-block geofoam,” (2014) Geotextiles and Geomembranes, 42 (2), pp. 166 – 180.
Erol V., Bugu S., Özaydin F., Altintaş A.A., “An analysis of concurrence entanglement measure and quantum fisher information of quantum communication networks of two-qubits,” (2014) 2014 22nd Signal Processing and Communications Applications Conference, SIU 2014 - Proceedings, no. 6830229, pp. 317 – 320.
Kelleci B., “Pulse suppression technique for mitigating digital clock noise,” (2014) Circuits, Systems, and Signal Processing, 33 (5), pp. 1325 – 1336.
Gurgun A.P., Zhang Y., Touran A., “Schedule contingency analysis for transit projects using a simulation approach,” (2013) Journal of Civil Engineering and Management, 19 (4), pp. 465 – 475.
Özcan D., Sönmez Ü., Güvenç L., “Optimisation of the nonlinear suspension characteristics of a light commercial vehicle,” (2013) International Journal of Vehicular Technology, 2013, no. 562424.
Aptoula E., Courty N., Lefèvre S., “Mitosis detection in breast cancer histological images with mathematical morphology,” (2013) 2013 21st Signal Processing and Communications Applications Conference, SIU 2013, no. 6531502.
Altintas A.A., Ozaydin F., Yesilyurt C., Bugu S., Arik M., “Constructing quantum logic gates using q-deformed harmonic oscillator algebras,” (2014) Quantum Information Processing, 13 (4), pp. 1035 – 1044.
Zeydan E., Kivanc D., Comaniciu C., Tureli U., “Energy-efficient routing for correlated data in wireless sensor networks,” (2012) Ad Hoc Networks, 10 (6), pp. 962 – 975.
Omeroglu P.Y., Boyacioglu D., Ambrus Á., Karaali A., Saner S., “An Overview on Steps of Pesticide Residue Analysis and Contribution of the Individual Steps to the Measurement Uncertainty,” (2012) Food Analytical Methods, 5 (6), pp. 1469 – 1480.
Sert E., Pinar Y., Taskin D., Taskin C., Topcubasi N., “Comparison computerized object recognition systems,” (2013) AMA, Agricultural Mechanization in Asia, Africa and Latin America, 44 (4), pp. 50 – 56.
Akgün T., Koç Z., Güner Ş., Öztürk B., Özkan B., Üstün Ö., Tuncay N., Özgüner Ü., “A study on autonomous vehicle development process at Okan University,” (2012) 2012 IEEE International Conference on Vehicular Electronics and Safety, ICVES 2012, no. 6294264, pp. 369 – 374.
Khayyer P., Ozguner U., Alankus O., “A study on bus convoy energy consumption using Monte Carlo analysis,” (2013) IECON Proceedings (Industrial Electronics Conference), no. 6699834, pp. 4346 – 4350.
Yesilyurt C., Bugu S., Ozaydin F., “An optical gate for simultaneous fusion of four photonic W or Bell states,” (2013) Quantum Information Processing, 12 (9), pp. 2965 – 2975.
Yilmaz M., Ustun O., Ali Zada P., Tuncay R.N., “The search for adaptive methods filtering out high-noises and their application on oil complexes' control telemetry systems,” (2013) Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013, no. 6556325, pp. 1430 – 1435.
Yildiran S.T., Yanikoglu B., Abdullah E., “Plant identification using local invariants,” (2014) 2014 22nd Signal Processing and Communications Applications Conference, SIU 2014 - Proceedings, no. 6830674, pp. 2094 – 2097.
Acar O.U., Keleş T., Koç Z., Güner S., Duruş M., Altuǧ E., Güvenç L., “Development of automatic lift axle system for trucks with mechanical suspensions,” (2013) IFAC Proceedings Volumes (IFAC-PapersOnline), 1 (PART 1), pp. 112 – 116.
Kholmetskii A., Missevitch O., Yarman T., “Relativistic transformation of magnetic dipole moment,” (2013) Progress In Electromagnetics Research B, (47), pp. 263 – 278.
Dinçmen E., Güvenç B.A., Acarman T., “Extremum-seeking control of ABS braking in road vehicles with lateral force improvement,” (2014) IEEE Transactions on Control Systems Technology, 22 (1), no. 6393506, pp. 230 – 237.
Aptoula E., “Comparative study of moment based parameterization for morphological texture description,” (2012) Journal of Visual Communication and Image Representation, 23 (8), pp. 1213 – 1224.
Ekincioglu O., Ozkul M.H., Struble L.J., Patachia S., “Optimization of material characteristics of macro-defect free cement,” (2012) Cement and Concrete Composites, 34 (4), pp. 556 – 565.
Holzinger A., Yildirim P., Geier M., Simonic K.-M., “Quality-based knowledge discovery from medical text on the web example of computational methods in web intelligence,” (2013) Intelligent Systems Reference Library, 50, pp. 145 – 158.
Güvenç B.A., Necipoǧlu S., Demirel B., Güvenç L., “Robust control of atomic force microscopy,” (2013) Mechatronics, pp. 103 – 132.
Alankus O.B., “Application of S-curve methodology for forecasting of V2X communications and autonomous vehicle research,” (2012) 2012 IEEE International Conference on Vehicular Electronics and Safety, ICVES 2012, no. 6294258, pp. 302 – 305.
Aptoula E., “Bag of morphological words for content-based geographical retrieval,” (2014) Proceedings - International Workshop on Content-Based Multimedia Indexing, no. 6849837.
Aptoula E., Courty N., Lefevre S., “An end-member based ordering relation for the morphological description of hyperspectral images,” (2014) 2014 IEEE International Conference on Image Processing, ICIP 2014, no. 7026032, pp. 5097 – 5101.
Rahnama B., Kiran Y., Dara R., “Countering AES static S-box attack,” (2013) SIN 2013 - Proceedings of the 6th International Conference on Security of Information and Networks, pp. 256 – 260.
Aptoula E., Weber J., Lefèvre S., “Vectorial quasi-flat zones for color image simplification,” (2013) Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7883 LNCS, pp. 231 – 242.
Tureli U., Kivanc D., “Capacity and association for outdoor small cell LTE-A network,” (2014) 2014 22nd Signal Processing and Communications Applications Conference, SIU 2014 - Proceedings, no. 6830668, pp. 2070 – 2073.
Courty N., Aptoula E., Lefevre S., “A classwise supervised ordering approach for morphology based hyperspectral image classification,” (2012) Proceedings - International Conference on Pattern Recognition, no. 6460550, pp. 1997 – 2000.
Korkmaz S., Aptoula E., “Extended morphological covariance,” (2012) 2012 20th Signal Processing and Communications Applications Conference, SIU 2012, Proceedings, no. 6204455.
Ozden S., Barka G., Atakoy H., Hancioglu B., Ozkan U., “Earthquake experience of Turkish precast industry,” (2013) ECCOMAS Thematic Conference - COMPDYN 2013: 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Proceedings - An IACM Special Interest Conference, pp. 1494 – 1501.
Sevgi L., “Accreditation: Crucial in world trade, public safety, and human rights,” (2014) IEEE Antennas and Propagation Magazine, 56 (4), no. 6931713, pp. 265 – 275.
Akay O., Özer A.T., Fox G.A., Bartlett S.F., Arellano D., “Behavior of sandy slopes remediated by EPS-block geofoam under seepage flow,” (2013) Geotextiles and Geomembranes, 37, pp. 81 – 98.
Emirler M.T., Kahraman K., Şentürk M., Aksun Güvenç B., Güvenç L., Efendioǧlu B., “Vehicle yaw rate estimation using a virtual sensor,” (2013) International Journal of Vehicular Technology, 2013, no. 582691.
Ozden S., Atalay H.M., Akpinar E., Erdogan H., Vulaş Y.Z., “Shear strengthening of reinforced concrete T-beams with fully or partially bonded fibre-reinforced polymer composites,” (2014) Structural Concrete, 15 (2), pp. 229 – 239.
Yanikoglu B., Aptoula E., Yildiran S.T., “Sabanci-okan system at ImageClef 2013 plant identification competition,” (2013) CEUR Workshop Proceedings, 1179.
Gurgun A.P., Komurlu R., Arditi D., “Assessment of leed requirements for water efficiency in developing country-specific certification,” (2013) ISEC 2013 - 7th International Structural Engineering and Construction Conference: New Developments in Structural Engineering and Construction, pp. 1697 – 1702.
Dündar S., Şahin T., “Train re-scheduling with genetic algorithms and artificial neural networks for single-track railways,” (2013) Transportation Research Part C: Emerging Technologies, 27, pp. 1 – 15.
Taylan F., Altiok E., “Meiotic recombinations within major histocompatibility complex of human embryos,” (2012) Immunogenetics, 64 (11), pp. 839 – 844.
Kaypmaz T.C., Tuncay R.N., “Diagnosing overcharge behavior in operation of Li-ion polymer batteries,” (2012) 2012 IEEE International Conference on Vehicular Electronics and Safety, ICVES 2012, no. 6294303, pp. 352 – 356.
Yanikoglu B., Aptoula E., Tirkaz C., “Sabanci-okan system at image Clef 2012: Combining features and classifiers for plant identification,” (2012) CEUR Workshop Proceedings, 1178.
Ustun O., Ozturk S.B., Kivanc O.C., Ali Zade P.G., Tuncay R.N., “Exciting system selection for brushless synchronous machine,” (2012) IET Conference Publications, 2012 (613 CP).
Ozden S., Akpinar E., Erdogan H., Atalay H.M., “Performance of precast concrete structures in october 2011 Van earthquake, Turkey,” (2014) Magazine of Concrete Research, 66 (11), pp. 543 – 552.
Kholmetskii A.L., Missevitch O.V., Yarman T., “Torque on a moving electric/magnetic dipole,” (2012) Progress In Electromagnetics Research B, (45), pp. 83 – 99.
Aptoula E., “Extending morphological covariance,” (2012) Pattern Recognition, 45 (12), pp. 4524 – 4535.
Yanikoglu B., Aptoula E., Tirkaz C., “Automatic plant identification from photographs,” (2014) Machine Vision and Applications, 25 (6), pp. 1369 – 1383.
Türeli U., Ayikol D., Kivanç D., “Coverage and throughput of heterogenous LTE-A network with biased BS association,” (2013) 2013 21st Signal Processing and Communications Applications Conference, SIU 2013, no. 6531507.
Yildirim P., Majnarić L., Ekmekci O.I., Holzinger A., “Knowledge discovery of drug data on the example of adverse reaction prediction,” (2014) BMC Bioinformatics, 15 (6), no. S7.
Altay I., Guvenc B.A., Guvenc L., “A simulation study of GPS/INS integration for use in ACC/CACC and HAD,” (2013) 2013 9th Asian Control Conference, ASCC 2013, no. 6606264.
Yildirim P., Majnarić L., Ekmekci O.I., Holzinger A., “On the prediction of clusters for adverse reactions and allergies on antibiotics for children to improve biomedical decision making,” (2013) Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8127 LNCS, pp. 431 – 445.
Aptoula E., Yanikoglu B., “Morphological features for leaf based plant recognition,” (2013) 2013 IEEE International Conference on Image Processing, ICIP 2013 - Proceedings, no. 6738307, pp.1496 – 1499.
Tuncay R.N., Ustun O., Yilmaz M., Gokce C., Karakaya U., “Design and implementation of an electric drive system for in-wheel motor electric vehicle applications,” (2011) 2011 IEEE Vehicle Power and Propulsion Conference, VPPC 2011, no. 6043070.
Tayyar I.H., Buyukaksoy A., “A Wiener-Hopf analysis of the coaxial waveguide radiator,” (2011) Proceedings - 2011 International Conference on Electromagnetics in Advanced Applications, ICEAA'11, no. 6046405, pp. 580 – 583.
Yarman T., Yarman F., Özaydin F., “The interdependence of electronic energy, period of time, mass and internuclear distance displayed by any object, Part 2: Molecular derivation and application to chemically alike molecules,” (2011) Scientific Research and Essays, 6 (21), pp. 4478 – 4491.
Shakhmurov V.B., Shahmurova A., “Nonlinear abstract boundary value problems modelling atmospheric dispersion of pollutants,” (2010) Nonlinear Analysis: Real World Applications, 11 (2), pp. 932 – 951.
Ustun O., Yilmaz M., Ali-Zada P., Tuncay R.N., Mamadov H., “Car and renewable energy storage accumulators active life extension for hazardous wastes eco-impact minimization,” (2010) 2010 IEEE Vehicle Power and Propulsion Conference, VPPC 2010, no. 5729000.
Necipoglu S., Cebeci S.A., Basdogan C., Has Y.E., Guvenc L., “Repetitive control of an XYZ piezo-stage for faster nano-scanning: Numerical simulations and experiments,” (2011) Mechatronics, 21 (6), pp. 1098 – 1107.
Agarwal R.P., O'Regan D., Shakhmurov V.B., “Uniform separable differential operators with parameters,” (2010) Journal of the Franklin Institute, 347 (1), pp. 2 – 16.
Ozer A.T., Lawton E.C., Bartlett S.F., “New method to determine proper strain rate for constant rate-of-strain consolidation tests,” (2012) Canadian Geotechnical Journal, 49 (1), pp. 18 – 26.
Necipoglu S., Cebeci S.A., Has Y.E., Guvenc L., Basdogan C., “Robust repetitive controller for fast AFM imaging,” (2011) IEEE Transactions on Nanotechnology, 10 (5), no. 5688327, pp. 1074 – 1082.
Akyildiz F.T., Vajravelu K., Ozekes H., “Fourier-Galerkin domain truncation method for Stokes' first problem with Oldroyd four-constant liquid,” (2008) Computers and Mathematics with Applications, 55 (11), pp. 2452 – 2457.
Yildirim P., Çeken Ç., “Literature mining for the diagnostic procedures of osteoporosis,” (2011) Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7058 LNCS, pp. 43 – 51.
Dolma A., Karayahşi K., “Free Space Optic /Radio Frequency (FSO/RF) hybrid communication systems and various applications,” (2010) SIU 2010 - IEEE 18th Signal Processing and Communications Applications Conference, no. 5650302, pp. 236 – 239.
Yildirim P., Ceken K., Saka O., “Discovering similarities for the treatments of liver specific parasites,” (2011) 2011 Federated Conference on Computer Science and Information Systems, FedCSIS 2011, no. 6078283, pp. 165 – 168.
Güngör B., Akgün T., “The management of the emergency lighting systems with DALI interface,” (2010) 2010 National Conference on Electrical, Electronics and Computer Engineering, ELECO 2010, no. 5698090, pp. 234 – 238.
Risbo L., Hezar R., Kelleci B., Kiper H., Fares M., “Digital approaches to ISI-mitigation in high-resolution oversampled multi-level D/A converters,” (2011) IEEE Journal of Solid-State Circuits, 46 (12), no. 6032045, pp. 2892 – 2903.
Inan H.I., Yomralioglu T., Ulger N.E., “Evaluation of national farmers' registry data in geoinformation context: Case study of Trabzon, Turkey,” (2011) Scientific Research and Essays, 6 (2), pp. 422 – 429.
Ekincioglu O., “A discussion of paper "a novel indirect tensile test method to measure the biaxial tensile strength of concretes and other quasibrittle materials" by G. Zi, H. Oh, S.K. Park,” (2010) Cement and Concrete Research, 40 (12), pp. 1769 – 1770.
Ozturk S.B., Toliyat H.A., “Direct torque and indirect flux control of brushless DC motor,” (2011) IEEE/ASME Transactions on Mechatronics, 16 (2), no. 5438764, pp. 351 – 360.
Yilmaz M., Tuncay R.N., Ustun O., Krein T.P., “Sensorless control of brushless DC motor based on wavelet theory,” (2009) Electric Power Components and Systems, 37 (10), pp. 1063 – 1080.
Yarman T., “A cosmically whole ethical system: How to attain a sustainable energy consumption and development, and a most stable world peace? ,” (2011) Scientific Research and Essays, 6 (4), pp. 928 – 932.
Shakhmurov V.B., Agarwal R.P., “Linear and nonlinear degenerate boundary value problems in Besov spaces,” (2009) Mathematical and Computer Modelling, 49 (5-6), pp. 1244 – 1259.
Kaypmaz T.C., Tuncay R.N., “An advanced cell model for diagnosing faults in operation of Li-ion polymer batteries,” (2011) 2011 IEEE Vehicle Power and Propulsion Conference, VPPC 2011, no. 6043007.
Yanikoglu B., Aptoula E., Tirkaz C., “Sabanci-Okan System at Image Clef 2011: Plant identification task,” (2011) CEUR Workshop Proceedings, 1177.
Çinar G., Büyükaksoy A., “High frequency scattering by a second-order generalized impedance discontinuity on a cylindrically curved surface,” (2012) Progress In Electromagnetics Research B, (38), pp. 165 – 188.
Ozturk S.B., Alexander W.C., Toliyat H.A., “Direct torque control of four-switch brushless dc motor with non-sinusoidal back emf,” (2010) IEEE Transactions on Power Electronics, 25 (2), no. 5204142, pp. 263 – 27.
Özer A.T., Bromwell L.G., “Protecting roller-compacted concrete armored emergency spillway against uplift with geocomposite drain: Loxahatchee reservoir example,” (2012) Geosynthetics International, 19 (5), pp. 324 – 338.
Aptoula E., Lefèvre S., “Morphological texture description of grey-scale and color images,” (2011) Advances in Imaging and Electron Physics, 169, pp. 1 – 74.
Dinçer M.B., Mehmet A.Ç., Nejat T., “Development of control strategy based on fuzzy logic control for a parallel hybrid vehicle,” (2009) ELECO 2009 - 6th International Conference on Electrical and Electronics Engineering, no. 5355350, pp. II342-II346.
